Электрондық пошта пішімі қатесі
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
CNC woodworking lathes must be installed in strict accordance with the installation conditions and requirements specified in the lathe manual. If economic conditions permit, it should be installed in isolation and better maintained at a later stage.
At the same time, its use environment should take into account: temperature, humidity, vibration, power supply voltage, frequency and interference. Only by doing this can the maintenance requirements be met.
Professional operators know how to operate correctly to avoid unnecessary hardware damage to the lathe due to operational mistakes, and these personnel are familiar with the mechanical parts of the machine tool, numerical control systems, strong electrical equipment, hydraulic pressure, air pressure and other parts and the use environment, processing conditions, etc.
Have a maintenance electrician with operating experience inspect the vehicle once a year on a regular basis. Detect the output voltage of the power module, the reference voltage of the numerical control unit, etc., and clean up the dust in time; check whether each part is loose; replace or repair the relevant parts, etc.
When the tool holder does not rotate, the operator should first determine the correctness of the operation. If it is in the manual state, the system should be placed in the manual mode; if it occurs during the execution of the program, the correctness of the program should be checked first. sex. If the above situation is excluded and the problem still exists, there are the following possibilities, which can be checked one by one.
When the operator issues a command to rotate the spindle, the spindle does not rotate. At this time, it should be judged first whether the spindle motor has been rotated. If the main motor has been rotated, but the spindle does not rotate, it should be that the gear shift of the gearbox is not in the position. In this case, the operator should stop the rotation of the spindle motor first, and then re-gear when the motor stops stably. It should be noted that every time the gear is shifted, it should be accurately in place, so that the inner gears of the gearbox can fit tightly, otherwise the gears will be seriously worn and affect the use.
If the spindle motor does not turn, it can be considered an electrical reason. Generally, there are two forms of control of the machine tool to the spindle:
For more information about wood machining services near me,cnc wood turning lathe machine price,cnc wood turning machine, we are glad to answer for you.